Data on bond strength of resin cement systems to CAD/CAM resin composite after aging

They were bonded using three different types resin cements. Half of all the specimens were tested immediately following 24 hours of immersion in water at 37°C (thermaocycling 0 cycle ; TC 0), and half were subjected to thermocycling 10,000 cycles following 24 hours of immersion in water at 37°C (TC 10,000).

The tensile test was used to determine the bond strength in MPa. The fracture surface and mode between resin cement and CAD/CAM resin composite were determined by naked eye and scanning electron microscope observation.