Spectral Measurements and Formaldehyde Retrievals from Halifax Harbour and Saint Mary's University Atmospheric Observatory (2018, 2021, and 2023)

Contained in each measurement folder there is a folder containing retrieval information and a .tim file which contains temporal information in seconds elapsed since file start (Ex., if the first row in the .tim file is "258.423" and the measurement folder is entitled "2020_12_18_17_33_12_898)...", then the first measurement was made at 2020/12/18 17:33:12.898 + 258.423 = 2020/12/18 17:37:31.321). Within each retrieval folder (H2CO_*version) is a folder entitled "FIT" which contains the spectral information in plain text (.txt format) of the measured spectrum and fitted gases within the spectral range 2745nm - 2800 wn, one .txt file per spectrum.

Each file contains the columns Wavenumber, Measured, Fitted, Residual, H2O, H2CO, N2O, and CH4 with the units of normalized transmittance, apart from Wavelength. Note that the column "Measured" is the raw intensity while the remaining columns are outputs from the spectral fitting program used ("Residual" is the difference of "Measured" and "Fitted"), including component gas contributions to "Fitted". All spectral measurements were recorded using a Bruker Open Path Air Monitoring System, recording over the 650 – 5000 cm-1 with an MCT detector and spectral resolution of 0.5 cm-1.

Data acquisition was handled with the OPUS RS gas analysis software from Bruker.