Total Dose Effect Output Waveform of NC7SZ157

The test was set up with three dose points, which were 0 krad(Si), 50 krad(Si), and 100 krad(Si). For the test, input port I0 of the NC7SZ157 was set to '0', port I1 was set to '1' and port S was connected to a 40 KHz square wave signal.

The waveforms of the NC7SZ157's output port Z were captured using a static test method with an oscilloscope. This resulted in a data file with 4 columns, the column labels are time (in s), voltage at 0 krad(Si) (in V), voltage at 50 krad(Si) (in V), and voltage at 100 krad(Si) (in V). It should be noted that the data may have errors due to testing.