Gaseous elemental mercury measurements of boundary layer air made by a Tekran 2537 during the SIPEX II voyage of the Aurora Australis, 2012

Instrument Setup: This instrument was sampling from a weather protected inlet positioned ~3 m off the front port side of the Monkey Deck of the Aurora Australis, directly above the bridge. The 35m heated Teflon sample line end and filter is contained within the "Ned Kelly", a large (~30 cm diameter) stainless steel can which protects against rain, snow, sea spray and major impacts. This sample line ran 25m down to the Tekran instrument which was located in a the Met-Lab.

Ar (99.999% purity) was fed into the MetLab via quarter inch Teflon tubing from the oxygen store on the Monkey deck. A 2D R.M. Young (model 5305-AQ) anemometer was also deployed at the same elevation on the aft side of the sample inlet. The anemometer was oriented with zero degrees pointed directly forward of the ship.

Mean Wind speed and direction were captured using Campbell Scientific CR1000 datalogger at five-minute intervals. The files included in this dataset are the raw outputs from the Tekran 2537. They include headers, though not always at the top of the file, because headers are only written when the instrument is started or after recalibration.

Also included are scanned log books containing meteorological observations, maintenance notes, and when adjustments were made to the sample line (which alters anemometer data).