793 datasets

ZivaHub2027 · Crystal structure

Triboelectric nanogenerators (TENGs) capable of operating at elevated temperatures remain constrained by charge dissipation and the poor thermal stability of conventional polymer dielectrics. Here, liquid metal (LM)-integrated polyimide (PI) nanofibers are developed as a thermally robust triboelectric platform for harsh-environment energy harvesting. Gallium-based LM nanospheres are incorporated i

NCL Data2026 · Crystal structure

<p dir="ltr">This study aims to address plastic pollution challenges faced in El Cercado, Dominican Republic, through a community-based approach. Discarded packaging sheets, films and wraps made of low-density polyethylene (LDPE) were heat-pressed into laminates, which were then used as lining materials for low-load consumer products such as handbags, purses and wallets. A full factorial design of

NCL Data2026 · Crystal structure

<p dir="ltr">This folder contains all the raw data used in the manuscript submitted to ACS Applied Bio Materials. </p>

NCL Data2026 · Crystal structure

<p>Polyurethane-bound pavement composites offer high mechanical performance, but accelerated durability rankings can depend on how aging is imposed and which material response is measured. This study compared a moisture-curing methylene diphenyl diisocyanate-based polyether polyurethane binder and dense PC-13 composite under thermo-oxidative, hygrothermal, continuous ultraviolet (UV), intermittent

figshare + Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Astronomical catalogue

Supplementary material provided includes simulation parameters, turn-on voltage extraction, surface potential correction, and numerical solutions.

Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Crystal structure

<p>Glass is a nearly ubiquitous material in cultural heritage institutions around the globe. Glass is a component in an incredibly broad range of item types, ages, locations of origin, and uses. Similarly, the composition of glass can vary immensely from item to item. While recent research has been focused on understanding trends in glass deterioration in museum collection items, most of these stu

figshare + Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Astronomical catalogue

<p dir="ltr">This dataset provides a curated literature database of fatigue data for fiber-reinforced polymer (FRP) composites. It was constructed from a systematic collection and review of published experimental fatigue studies and contains 47 valid studies, 276 test series, and 1,136 confirmed S-N data points.</p><p dir="ltr">In addition to the confirmed S-N data, the release separately provides

figshare + Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Astronomical catalogue

<pre><code>Full artifact bundle for the controllable synthetic benchmark: MoS2/WSe2 and MoSe2/WSe2 datasets, trained models, inverse-design Pareto solutions, and all experiment scripts and results.</code></pre><p></p>

Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Crystal structure

<p dir="ltr"><i>This dataset contains the finite element meshes, code_aster input/output files and Python scripts used in the study "Casting-like versus precured thick-bondline single-lap joints: A cohesive zone numerical study" [citation/DOI to be added once the paper is published].</i></p><p dir="ltr"><i>A three-dimensional cohesive zone model (CZM_LIN_REG, code_aster 17.4, meshed in Salome-Meca

Teesside University Research Data Repository2026 · Crystal structure

This dataset contains the electrical characterisation data of dual-active-layer amorphous IGTO thin-film transistors (TFTs) treated with ultraviolet–ozone (UVO) at two different positions within the channel stack. Two factors are varied: the treatment position (top layer or bottom layer) and the UVO duration (0, 10, 15, 20 and 25 min), where 0 min is the untreated reference. It comprises 10 device

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure

In chapter 1, a solid phase extraction method which allowed for enhanced qPCR output when detecting COVID-19 mRNA from complex wastewater streams across different wastewater treatment sites in Northern Ireland was developed.<br>This work took two parallel research streams, in the first, a range of commercial and bespoke polymeric extractant materials, chosen for their range of functionalities, por

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure · unknown

As part of the next generation of hard drive technologies for Seagate Technologies, heat assisted magnetic recording (HAMR) relies on the novel combination of plasmonics and material design. The material choice of the near field transducer (NFT) as part of HAMR is critical to the efficiency and effectiveness of future hard drive technologies. The NFT is subjected to intense environmental condition

ZivaHub + Deakin Research Online + DMU Figshare + HKU DataHub + Swinburne Figshare + DaYta Ya Rona + SUNScholarData + figshare + Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Astronomical catalogue

The supplementary material provides additional details on methodologies and results of MD simulations described in the main text. It includes a description of equilibration of slabs with polymer/peptide interfaces, LAMMPS data files showing partiail atomic charges assigned to the polymers, and a LAMMPS input script for performing simulations with a Ewald correction term for the slab geometry.

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure · unknown

Photonic crystal surface emitting lasers (PCSEL) are an emerging form of semiconductor laser diode which provide simultaneous high power, narrow divergence, narrow line width, immense beam functionality, on-chip testing, and cost-effectiveness, all whilst in a compact form. The vast majority of research in the field is restricted to TE-polarised square lattice PCSELs where a large refractive index

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure

Medical devices are vital in modern medicine, but device-associated infections pose significant challenges. Bacterial adhesion and biofilm formation on device surfaces lead to infections with serious consequences. This thesis focuses on combating prosthetic joint infections (PJIs) and catheter-associated urinary tract infections (CAUTIs). Releasing-type antibacterial coatings were developed for me

ZivaHub + Deakin Research Online + DMU Figshare + UCL Research Data Repository2026 · Crystal structure · unknown

Composite laminates have enabled the creation of components that are lighter and stronger than their metallic equivalents, making them an enticing material for the development of novel components. However, the cost to build accurate and efficient structural analysis models of these components can be a limiting factor in the development process. This issue stems from the composite laminate being co

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure

This research is situated within the field of historical archaeology and uses a methodology combining archaeological excavation evidence with documentary records. Themes pertinent to the thesis include colonialism, capitalism, consumption, identity, material culture and materiality. The research focuses on a neglected pottery type in Ulster – glazed coarse earthenware. It begins with an appraisal

ZivaHub + Deakin Research Online + DMU Figshare + HKU DataHub + Swinburne Figshare + DaYta Ya Rona + SUNScholarData + figshare + Loughborough Research Repository + GRANTS Data + UP Research Data Repository2026 · Astronomical catalogue

The supplementary material file provides material parameters used in the nextnano++ simulations of ScAlN/GaN band-structure, equations for the ISB absorption and calculated values of the dipole matrix element. Figure S1 shows the effect of interdiffusion on the band structure of a Sc0.14Al0.86N/GaN (6 nm/6 nm) QW. Figure S2 shows the composition profiles for 1 nm and 2 nm Sc0.14Al0.86N/GaN QWs ass

ZivaHub + Deakin Research Online + DMU Figshare + UCL Research Data Repository2026 · Crystal structure · unknown

This thesis investigates the configurations and thermal mobility of ferroelectric- ferroelastic domains in both poly- and single-crystalline form of the seminal ferroelectric, BaTiO3. These studies have resulted primarily from (S)TEM methods, performed on free-standing thin-film lamellae, with a strong emphasis on in situ TEM techniques. The results here presented are accompanied with relevant the

ZivaHub + Deakin Research Online + DMU Figshare + UCL Research Data Repository2026 · Crystal structure

The use of magnetic fields has the potential to tailor the orientation and distribution of dispersed particles within polymer composites to create materials with anisotropic properties. However, limited literature exists on anisotropic nanocomposite hydrogels prepared under low magnetic fields, which are of interest for various soft and wet applications. This research reports polyacrylamide/montmo

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure

Prosthetic technology lacks effective, 3D-printable strain sensors for enhancing sensory feedback. This study explores the potential of thermoplastic polyurethane (TPU) and polyamide 11 (PA11) blends with graphene nanoplatelets (GNPs) to address this challenge. The composites were extruded using a twin-screw extruder. Raman spectroscopy and atomic force microscopy (AFM) were used to analyse GNPs.

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure · unknown

Composite materials find increasing applications in aerospace, automotive, and marine sectors due to their exceptional specific strength, stiffness, corrosion resistance, design flexibility, potential for reduced part count, and dimensional stability. However, the high cost of composites and the shift towards larger integrated structural components make replacing damaged parts prohibitively expens

DMU Figshare + UCL Research Data Repository2026 · Crystal structure · unknown

This thesis was conducted as part of an Innovative Training Network (ITN) (“ICONIC” - Improving the crashworthiness of composite transportation structures), funded by the European Union’s Horizon 2020 research and innovation programme, under the Marie Sklodowska-Curie grant agreement No 721256. The reported work was undertaken within Work Package 3 (WP3) - “Numerical modelling of impact and crush

ZivaHub + Deakin Research Online + DMU Figshare2026 · Crystal structure

Advanced composite structures have traditionally been designed using layups restricted to four discrete fibre orientations: 0°, ±45°, and 90°, collectively referred to as Quad laminates. This approach has become deeply embedded as an industry standard, reinforced by established design practices, certification frameworks, and manufacturing conventions. However, the reliance on a limited set of disc

ZivaHub + Deakin Research Online + DMU Figshare + UCL Research Data Repository2026 · Crystal structure · unknown

Rotational moulding is a manufacturing process that produces huge hollow plastic parts compared to injection or blow moulding. In a typical rotomoulding cycle, a polymer powder is loaded into a metal mould to be bi-axially rotated and heated. Once a molten plastic layer entirely covers the mould, the tool is moved to a cooling chamber where the temperature decreases until the part is solidified to